We know that the Apple iPad is a superb tool that transforms the way to learn so best for education, the iPad will change the way you work. But today’s problem is the iPad Sleep button Stuck. There are many Fixed that you can try to resolve the iPad sleep button stuck or not responding. Apple’s iPadOS device comes with a sleep/wake button, it works to turn off/ turn on the screen and restart the device through a long press Sleep/wake button. Now, whenever you trying to turn off/on your iPad screen and your iPad Sleep button not working in such an issue we offered potential clues that you can apply for Apple iPad Air, iPad mini, and iPad Pro model.
Many users sought that the after update software device, their iPadOS device sleep/wake button not working, if you’re one out of them please follow given steps.
Easy Solution to Resolve iPad Sleep button Stuck or Not responding
Remove the Case from iPad
An incompatible case can lead to this issue, though, you can try removing the case and see if the iPad Power Button Not Working is fixed or not. The cheap quality cases usually cover up the extra, like the power button, camera, sensors, and other hardware. Therefore, you should always prefer original compatible cases.
iPad Power Button Not Responding: Hardware or Software Fault?
Usually, there are two types of problems, one is Software and the other is Hardware. If it is a hardware fault, then we can’t help you, because repairing the device without any expertise can damage the iPad. Book an appointment at Apple Genius Bar and get it repaired.
Or if it is a software issue, then it can be troubleshooting by following certain tricks, like force restarting the iPad. Plus, as a temporary solution, you can use the AssistiveTouch to Lock the iPad or Screenshot.
As of now, let’s restart your iPad, open the Settings App > General > Shut Down.
Now to boot the iPad, connect the charger or power source, and let the iPad restart.
Alternatively, Use AssistiveTouch
The AssistiveTouch is a virtual button that offers quick access to numerous features, and the best part is it is fully customizable and stays on the Home Screen all the time if you enable it. You can Lock, take Screenshots, Increase/Decrease Volume, Lock Rotation, and more.
Till you fix the iPad Pro power button not working, use the AssistiveTouch.
- Open the Settings
- Tap Accessibility.
- Toggle AssistiveTouch ON.
- Further, tap on Customize Top Level Menu, customize the AssistiveTouch, the way you want to.
Backup & Put iPad into DFU Mode
Lastly, all you can do is restore the iPad in DFU Mode. The iPad will become unresponsive when it is in the DFU mode, though it can be operated from the PC. Back up the iPad, if you can to avoid data loss. This may or may not work, if you wish to visit Apple Support then skip this step, but don’t forget to Backup the iPad.
- Go to the Settings
- Tap on your name.
- Select iCloud.
- Tap iCloud Backup.
- Enable the iCloud Back up and make sure to connect it to the Wi-Fi. The backup will start automatically.
Once the Backup is completed, now is the time to put the iPad into DFU mode.
- Connect the iPad to the PC using a lightning cable and launch iTunes.
- Press and hold the Power button and Home button until the screen goes black.
- When the screen goes dark, leave the Power button after counting 3 seconds.
- Keep holding the Home button, and there check on iTunes whether the iPad is detected or not.
- Click OK and then click Restore iPad.
- If the iPad screen shows anything, then follow the steps from the beginning as it is not in DFU Mode.
Contact Apple Support
Your last hope is the Apple Support team, they will examine the iPad and tell you what’s the problem, and fix it. Book a genius bar appointment to the nearest Apple Store and get there on time.
