After the update the device it usually gets restart or reboot. But you are waiting for the turn on screen since few minutes then you can say it is in stuck mode. For a reason, Apple watch stuck on logo after Update WatchOS 5. Now you need to use hardware component (Here’s apple watch button) that help to force came out or bypass the stage. And turn back to normal screen.
Nothing is going wrong, you can use new released Apple WatchOS 5 on your supported Apple Watch (Apple watch Series 1, Apple watch Series 2 and Apple watch Series 3).
Sometimes ‘Apple watch stuck on apple logo after reset’ or ‘Apple Watch Flashing apple logo’. Follow the same guide and fix.
Helpful steps for Apple watch stuck on logo after Update WatchOS 5
Step 1: Reboot or Force Restart Apple Watch after Update WatchOS 5
Sometimes apple watch conflict with the latest version of WatchOS and Previous data restore after upgrade WatchOS.
First Hard Reboot Apple Watch, Press and Hold Side button and Digital Crown simultaneously for 10 seconds approx. Release both buttons until you see the apple logo on the screen.
Step 2: Change Apple watch Setting, Turn off Screen Curtain and Voice over mode
Some internal settings might be arising issue, your watch turns on normally, but you don’t know your watch goes into Curtain mode and Behavioural Screen not responding to touch, Disable that mode.
Launch Apple Watch app on your iPhone, Go to the Settings > General > Accessibility > Voice Over > Turn off Curtain off.
Step 3: Apple Help!
Apple Always helps your customer under some warranty rules. If you have a serious issue, get the free replacement or repair in free. Book your appointment and online assistant from here
Hope you confidentially fixed your Apple watch stuck on apple logo after update watchOS 5. More help and discussion with me comment this article below.